Settings; Sounds; Display; Tone Length - UTStarcom CDM8460 Owner's Manual

Settings

Sounds

Sets Ringers, Tone Length, Volume, and Alerts.
Ringers
To select a ringer type for incoming calls or messages:
Voice Calls
1
Press 'Menu>5.Settings >1.Sounds>1.Ringers>1.Voice Calls'.
2
Select "Caller ID" or "No Caller ID" then press
3
Select your desired ringer type then press
save your selection.
Messages
1
Press 'Menu>5.Settings>1.Sounds>1.Ringers>2.Messages'.
2
Select "Voicemail", "Text/Multimedia" or "Web Alerts" and
press [OK].
3
Select your desired ringer type then press
save your selection.
96
[OK].
[SELECT] to
[SELECT] to
Alarm
1
Press 'Menu>5.Settings>1.Sounds>1.Ringers>3.Alarm'.
2
Select your desired ringer type then press
save your selection.

Tone Length

To adjust key tone length:
1
Press 'Menu>5.Settings>1.Sounds>2.Tone Length'.
2
Select "Long" or "Short" then press
Volume
Controls the Ringer, Earpiece, Key Tones, Power On/Off, and alerts
you to incoming calls in a variety of modes.
Ringer
Controls the Ringer volume and alerts you to incoming calls in the
following modes:
1
Press 'Menu>5.Settings>1.Sounds>3.Volume>1.Ringer'.
Voice Calls
To move directly to voice call, press [
Select one of the following options:
• High&Vibrate/High/Medium/Low/Escalating/Vibrate/
Ringer Off/Silence All
Settings
[SELECT] to
[OK] to save.
] in idle mode.
97