Table of Contents
Advertisement
Troubleshooting
If you find any abnormality during operation, immediately stop the operation, remove the power line plug,
and check the machine according to the following instructions. If necessary, contact the after-sales
service center of this company.
Status
Too high noise
The wine chiller
doesn't work
The wine chiller
door surface is
dewed
The
illumination
lamp is not lit
The door is not
improperly sealed
and there is a
leakage of cool air
The compressor
keeps operating for
long time
The refrigerating
effect of the wine
chiller is poor
There is any odor in the
wine chiller
The wine chiller
produces the liquid
flowing sound.
The wine chiller
produces snapping
sound in operation
The wine chiller is not level
The power supply is not switched on
The computer board is damaged
The compressor is provided with a protection
mode
The door is opened too frequently or the
door is opened for too long time
The external environment is highly humid
The wine chiller temperature is set too low
The illumination lamp is damaged
Check whether the power supply is switched
on
The door seal may be hardened or
deformed due to the low temperature
inside the wine chiller after operation for a
period of time.
If the temperature in the summer is too high, the compressor will work for long time. This is
normal.
If the wine chiller is not cool enough, please check against the following items:
If the wine chiller door is not properly sealed or the door is opened too frequently, close the
door tightly, and open the door at a lower frequency. Do not place too many drinks in the
wine chiller, and maintain a certain space between foods.
If the temperature inside the wine chiller reaches too low required temperature, check the
temperature setup, and set the temperature at a higher level.
Adjust the refrigerating level.
The wine chiller is exposed to sunshine or any heat source is located in its immediate area.
Any hot drink is placed into the wine chiller
The drinks in the wine chiller are crowded to impair the cool air circulation. The
wine chiller door is frequently opened or is not properly closed.
The new wine chiller may give off the smell of the foaming agent or plastic. That's normal,
and such smell will disappear slowly in future. Check whether there is any spoiled drink
inside the wine chiller.
Any odorant drink shall be tightly sealed using the plastic bag. The wine
chiller shall be cleaned on a regular basis.
The sound is generated from the flowing of the refrigerant inside the circulating pipeline of the
refrigerating system. That's normal. No further treatment is
required.
This is the sound generated in the startup of electric components, such as the relay and
thermal protector, during start or stop of the wine chiller.
This is caused by the mutual fine movements of various kinds of materials due to the
inconsistent thermal expansion and contraction arising out of abrupt
changes of the wine chiller inside temperature when the wine chiller is being started or
stopped.
Reason and solution
Level the wine chiller, for the unleveled wine
chiller may produce noise during
operation
Switch on the power supply
Notify the manufacturer for repair
The
operation
compressor is 5 minutes.
Do not open the door for too long time,
nor open or close the door too
frequently
Dry using a piece of dry cloth
Set a proper temperature
Notify
the
replacement of the lamp
Check the power supply
Use the hot air of the hair dryer to bake the
deformed surface or use the hot towel to
cover the deformed surface, and close
door and press it
tightly after the door seal is softened.
interval
of
the
manufacturer
for
11
Advertisement
Table of Contents
