Table of Contents
Advertisement
Routine maintenance and care instructions
1.
To develop the best performance of this machine and prolong its service life, it shall be serviced
frequently. Before maintenance, the power line plug shall be removed and it shall be confirmed that
the power supply has been cut off.
2.
It is not allowed to remove the power line plug from the socket by
pulling the cable.
3.
The wine chiller inside shall be thoroughly cleaned every year. To
clean the wine chiller, the plug shall be removed and the wine
chiller shall be emptied. Then the wine chiller inside shall be
cleaned using the wet soft cloth or sponge dipped with clean water
or soap liquid (or any other non-corrosive neutral cleanser). It is not
allowed to clean the wine chiller using the organic solvent, alkaline
detergent, boiled water, washing powder or acid and the like.
4.
In the humid environment or in the rainy weather, the wine chiller surface may be dewed, especially
on the external surface of the glass door. This is caused due to the contact with the moisture in the
air. In such a case, the surface can be dried using the dry cloth.
5.
To ensure the normal operation of the wine chiller in a long period of time, the user should inspect
the wine chiller on a regular basis; if any abnormality is found, the manufacturer shall be notified of
the same immediately.
6.
During cleaning operation, it is not allowed to use the water to flush the compressor compartment of
the wine chiller. After cleaning operation, the wine chiller shall be wiped using the dry cloth to prevent
rusting.
9
Advertisement
Table of Contents
