Table of Contents
Advertisement
Upper Tone
Variations
Now that we have selected a
basic Tone, it is possible to
select Variations (Tones which
are similar to the basic sound).
Be aware, however, that not all
Tones have Variations. Refer to
the TONES and VARIATIONS
chart on page 103. The tones
having variations are marked
with the symbol >.
a) Press and hold the
VARIATION button [51] in the
SS
N
ee
TONE select section; three
bw
A
--"
horizontal lines will appear in
сеге дө
the display.
2527
b) You can now proceed in
two ways:
b1)Press the VARIATION
[51]
button several times: all the
variations for the current tone
will be selected in succession.
b2) While continuing to hold
the VARIATION button, press
the TONE select button
[53](1—8) which corresponds
to the desired Variation
number. If the selected
Variation number exists, it will
be shown in the display.
While holding the VARIATION
button, press the select button
corresponding to the
selected variation again: the
three lines will appear again in
the display (no variation
selected).
Advertisement
Table of Contents
