Summary of Contents for Universal Remote PowerBlaster MRF-100B
Page 1
MRF100B PowerBlaster ™ OWNER’S MANUAL No More Pointing.. changing the way a remote control works! 500 Mamaroneck Avenue Harrison, NY 10528 Phone: 1-914-835-4484 FAX: 1-914-835-4532 www.universalremote.com OWNER’S MANUAL No More Pointing.. changing the way a remote control works! MRF100B PowerBlaster...
Page 2
THIS MANUAL. The information in this manual may be subject to change without prior notice. MASTERCONTROL, PowerBlaster, MacroPower, and SimpleSound are trademarks of Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks of their respective companies or organizations.
Page 3
Here’s How PowerBlaster ™ Works: 1. RF series remote controls (RF10, RF20, RF30) send RF (Radio Frequency) signals to PowerBlaster RF receiver. 2. PowerBlaster converts RF signals to IR (Infrared) ™ , which is an commands and sends them out to components in the same cabinet space via the built-in front blaster.
The Mounting Plate Red Status LED lights when PowerBlaster ™ receives an RF signal from an RF series remote control. Front blaster sends Infrared commands to all A/V components in the same cabinet space. Using the four enclosed screws, you can choose to fix the mounting plate to a wall or the back of your component cabinet.
Page 5
Program and Test Remote Control First Don’t connect power to PowerBlaster grammed and tested the remote control line of sight. PowerBlaster™ can interfere with testing and programming. STEP 1: Turn ON all of your components.
Universal Remote Control dealer. Units purchased from online auction sites or other unauthorized resellers have no warranty. This warranty does not cover the following items: - Damage from misuse, neglect, or acts of nature.
Need help?
Do you have a question about the PowerBlaster MRF-100B and is the answer not in the manual?
Questions and answers