Universal Remote PowerBlaster MRF-100B Owner's Manual page 3

3
Here's How PowerBlaster
1. RF series remote controls (RF10, RF20, RF30) send RF
(Radio Frequency) signals to PowerBlaster
RF receiver.
™ Works:
™ , which is an
2. PowerBlaster ™
converts RF signals
to IR (Infrared)
commands and sends them out to
components in the same cabinet
space via the built-in front blaster.
3. Self-adhesive "flashers" (included in the PowerBlaster
kit) affix to the front panels of your components. The
flashers relay commands to components out of sight of
PowerBlaster's ™ front blaster. The flashers plug in to
PowerBlaster's ™ rear flasher line output jacks. Each flasher
has a 10' cable to easily reach components on nearby
shelves.
4
™