Universal Remote Automator URC-200 Owner's Manual page 25

6
Press each of the number buttons for the channel.
Note: If a number is repeated when setting the channel
(for example, channel "33" or "522") it is usually best to
set a half second delay in between the identical numbers
by pressing the PAUSE button. Each press of the PAUSE
button increases the delay by a half second.
Note: Some brands of television require an ENT(Enter)
command after the channel numbers.
Press the LIGHT button after you enter the
7
channel number. A new screen appears:
To save the channel you entered, press the SAVE
8
button. The UNDO button lets you erase the last
entry. The EXIT button erases all entries for this
button.
When you are finished setting up Favorite
9
Channel buttons, press the MAIN button twice to
return to normal operation.
U R C - 2 0 0
23
PAUSE
Button
SAVE
Button