Table of Contents
Advertisement
SW
Name of Voice
This function lets you create an original title for a new voice you have created, so
you can easily identify it later. When the Name function is called, the current name
of the voice being edited is shown on the lower line of the LCD, and an underline
cursor appears under the first character of the voice name.
|
|
i
FUNC ED[PMBNAVT] |
|
NAME:
VoiceName
Note:
"+" and "—" symbols can be entered using the +/- (SYNC) button — press
"uon
EI
once for
"+"
or twice for "-."
Assign Mode
The Assign Mode
parameter sets the DS55 for either monophonic
(mono) or
polyphonic (poly) operation. The polyphonic mode is the one you'll normally use
with most voices, since it allows you play up to 8 notes simultaneously. The mono
Velocity Depth
Velocity Depth determines how the DS55 responds to keyboard dynamics (i.e.
how hard or fast you play the keys). The Velocity Depth range is from 0 to 7. The
higher the setting, the greater the response will be to variations in the way you
play the keys. The amount of variation produced will depend on the initial settings
of individual voices.
Transpose
The transpose parameter allows you to shift the pitch of the entire keyboard up or
down by a maximum of 2 octaves in semitone increments. The range is from -24
to +24. A setting of +4, for example, will raise the pitch of the keyboard by a major
third (middle C will have the pitch of E above middle C, etc.).
VOICE EDITING 8: STORE FUNCTION
15
|
Advertisement
Table of Contents
