Advertisement
Operation
Power On and Mode selection
•
Flick the On/Off switch to turn the turntable on.
•
Once you place the tonearm on the vinyl, the turntable will switch to vinyl mode and Bluetooth
will automatically be disabled. Place the tonearm back to the arm rest to switch back to Bluetooth
mode. When the tonearm is back in the arm rest, use the Mode knob to switch between Phono, USB and
Bluetooth mode.
Playing a Record
•
Place a record on the turntable platter and select the correct playing speed: 33, 45, 78 RPM (according to the vinyl
being played).
•
Remove the stylus guard and unlock the tone arm lock. Push the lift lever upward to raise the tone arm and then
gently move the tone arm to the desired position over the record. The platter will begin to spin when the tone arm
is moved toward the record.
•
Push the lift lever forward to lower the tone arm slowly onto the desired position on the record and begin playing
the record.
•
When you have finished playing the record, push the lift lever
backward to raise the tone arm and gently move it back to its
rest.
•
When you have finished playing records, engage the tone arm
lock to protect it from accidental movement. Flick the On/Off
switch to turn the turntable off. Unplug it from the power supply
if you are not going to use it for a while.
•
Note: when playing a record for the first time, you will need to
remove the rubber ring on the cartridge.
10 | OPERATION
®
To avoid damaging the stylus, ensure that the
included stylus guard is in place whenever the
turntable is being installed, moved or cleaned.
mode
®
Advertisement
