Advertisement
Operation
Power On and Mode selection
•
Flick the On/Off switch to turn the turntable on.
•
Set the Bluetooth/Speed control knob to BT for Bluetooth
33/45RPM playback.
Playing a Record
•
Place a record on the turntable platter and select the correct playing speed: 33, 45 RPM (according to the vinyl
being played).
•
Remove the stylus guard and unlock the tone arm lock. Push the lift lever upward to raise the tone arm and then
gently move the tone arm to the desired position over the record. The platter will begin to spin when the tone arm
is moved toward the record.
•
Push the lift lever forward to lower the tone arm slowly onto the desired position on the record and begin playing
the record.
•
The turntable will automatically stop if you set the Auto Stop switch to on.
•
When you have finished playing the record, push the lift lever
backward to raise the tone arm and gently move it back to its
rest.
•
When you have finished playing records, engage the tone arm
lock to protect it from accidental movement. Flick the On/Off
switch to turn the turntable off. Unplug it from the power supply
if you are not going to use it for a while.
10 | OPERATION
mode. Adjust the knob to 33 or 45 for Phono mode for
®
To avoid damaging the stylus, ensure that the
included stylus guard is in place whenever the
turntable is being installed, moved or cleaned.
* Illustration for reference only.
Advertisement
