Advertisement
Operation
Power On and Mode selection
•
Press the POWER button to turn the turntable on.
•
Once you place the tonearm on the vinyl, place the tone arm lift button to raise the tone arm up/down.
Press the RETURN button to return the tone arm to its resting position.
Playing a Record
•
Place a record on the turntable platter and select the correct playing speed: 33, 45 RPM (according to the vinyl
being played). Press the START/STOP button to start the turntable. Press again to stop (pause) the record.
•
Remove the stylus guard and unlock the tone arm lock. Press the tone arm lift button to raise the tone arm. The
platter will begin to spin when the tone arm is moved toward the record.
•
Press the tone arm lift button to put the tone arm down onto the desired position on the record and begin playing
the record.
•
When you have finished playing the record, press the RETURN button to return the tone arm to its resting position.
When you have finished playing records, press the RETURN
button to return the tone arm to its resting position. Unplug it
from the power supply if you are not going to use it for a while.
•
Note: the tone arm will automatically return when the vinyl has
played to the end.
10 | OPERATION
To avoid damaging the stylus, ensure that the
included stylus guard is in place whenever the
turntable is being installed, moved or cleaned.
Advertisement
