Download Print this page

Monster MT-TT02 User Manual page 11

3-speed turntable

Advertisement

Connect to an External Amplifier using the Line Out Port
Use the supplied 3.5mm to RCA audio cable to connect to the RCA output at the back of the turntable, and then
connect to the your external amplifier.
Playing Music from USB
The USB port on the side of the turntable allows you to play music from a USB.
1
2
3
4
NOTE:
If a USB has already been inserted when the unit is switched on and the Mode knob is set
to USB, the music from the USB will be played automatically.
Tips to better performance
When opening or closing the turntable cover, handle it gently, moving it either at the center or equally from both sides.
Do not touch the stylus tip with your fingers; avoid bumping the stylus on the turntable mat or on the edge of the record.
Clean the stylus tip frequently, using a soft brush with a back-to-front motion only.
If you use a stylus cleaning fluid, use it very sparingly.
Wipe the dust cover and turntable housing gently with a soft cloth. Clean the unit only with a dry, clean cloth.
Do not use liquid or aerosol cleaners.
Never apply harsh chemicals or solvents to any part of the turntable system.
Prior to moving the turntable, always unplug it from the AC power outlet and fasten the tone arm on the tone arm rest
with the vinyl twist-tie.
1.
USB port: insert your USB for music
playback
2.
: Play previous track.
3.
: Press to play or pause.
4.
: Play next track.
OPERATION | 11

Advertisement

loading