Related Manuals for GILANI ENGINEERING JRWD1003
Summary of Contents for GILANI ENGINEERING JRWD1003
- Page 1 ELECTRIC WHEELCHAIR JRWD1003 User Manual Before using this product, read this manual carefully and save for future reference...
- Page 2 Please read the user manual carefully before taking the product into use. This manual contains operations, assembly methods, and simple faults solutions. This manual applies to our models: JRWD1003. This manual contains wheelchair maintenance and self checking methods, please put it in proper ...
-
Page 3: Product Introduction
1 Product Introduction 1.1 Product Image Picture 1 1.2 Product Information Main technical data JRWD1003 Overall size 1110*630*1280mm N.W. 115kg Seat size 450*500mm Backrest height 650mm Height between seat and 510mm Max loading weight 100kg ground Armrest height 290mm Battery 12V 32AH*2pcs AC 220 (110V) ±10%... -
Page 4: Safety Instructions
2 Safety Instructions 2.1 Driving Notice General Driving Cautions Please keep your hands on the armrest to control the wheelchair. Please practice in parks or other safe open places until you can use the wheelchair skillfully. Fully practice driving in a safe place, to master principle of moving forward, stopping and turning ... - Page 5 Do not replace parts or material randomly. Do not add weight randomly, in case to cause imbalance. Do not use other vehicle to pull or push the wheelchair when somebody sits on the wheelchair or the wheelchair is in manual mode. When there is abnormal sound, contact service immediately.
-
Page 6: Battery And Charger
4 Battery and Charger 4.1 Charger Requirements The charger is used for battery charging. During electric wheelchair is charging, do not use it. Charger Technical Data ± Input voltage: AC 220V (110V) Output voltage: 24V/DC Output current: 5A 4.2 Usage of Charger In order to charge the battery, connect the charger with power supply and control socket. -
Page 7: Control Panel
5 Control 5.1 Control Panel 5.2 Control Usage Power Switch Press the on/off button, All Battery gauge LEDs turn on one by one. After the control has started up successfully, the Battery gauge shows the charge of the battery. Press again, all the LED lights are off. In some emergency, you can directly turn off power by press power button. - Page 8 Battery Power Gauge If user drive the electric wheelchair until the battery is completely empty or leave the battery with a low charge for a long time, you will damage the battery. This damage is permanent. The battery will never return to its original capacity and your chair will have a shorter range. Use of joystick Move the joystick.
- Page 9 Lying Mode Press the Seat Function button again, the “2” LED turns light, the wheelchair turn to lying mode. Pull the joystick forward, the footrest lift up and backrest lie down. Pull the joystick backward, the footrest lower down and backrest lift up. Under the armrest pad, there is a red button which controls the lying mode of backrest.
- Page 10 7 The Fault Indicator - Flash Codes A flash code is a specific number of short flashes, followed by a pause. If the fault is a serious fault that prevents the chair from driving, additionally the Battery Gauge shows a 'Drive Inhibit' indication. Flash code Fault source Explanation &...
-
Page 11: Maintenance
8 Maintenance Maintenance of wheelchair includes clean wheelchair, check wheel and battery, and charge battery. For further maintenance please contact with your dealer. Our suggestion is checking the wheelchair every half year, annually overhaul. 8.1 Clean and Battery Maintenance Clean Wheelchair Please clean the wheelchair regularly. -
Page 12: Warranty Issues
9 Warranty issues Warranty contents We elaborately design this wheelchair for you. If there are improper materials or manufacturing, we provide free repair and lifetime maintenance according to the time and conditions in warranty cards. Warranty does not cover in these conditions Subjective impression, no function problems. - Page 13 10 Others Condition for Transport and Storage During transport and storage, the electric wheelchair should be correctly placed as labeled indication. Transportation should be avoided moisture and sunlight and away from heat resource. In case of electric parts are damaged due to damp, please avoid storing the wheelchair in rain, ...
- Page 14 After Sales Service Card Card Holder: Contact No.: Model: Add: Mfg Date: Height: Weight: Joystick Position: Serial NO.: Quality Warranty: Your purchased product has following warranty service: 1. Motor, controller and frame has one year warranty. During warranty period, free maintenance. 2.
Need help?
Do you have a question about the JRWD1003 and is the answer not in the manual?
Questions and answers