Electrical Connection - Helios KWL-KP I Installation And Operating Instructions Manual

Installation and Operating Instructions
NOTE
NOTE
Condensate pump KWL-KP-I

3.2 Electrical connection

3.2.1 Connect the condensate pump KWL-KP-I (KWL-Yoga Style)
1. Place the power cable ➊ in the unit and lead it through the rubber grommet outwards
to the terminal box ➋ (see Fig.3).
➋
3.2.2 Power supply connection
Wire colour
Drahtfarbe
D
1 GRÜN/ GELB
1 GREEN/YELLOW
2 SCHWARZ
2 BLACK
3 WEISS
3 WHITE
4 VIOLETT
4 VIOLET
5 VIOLETT
5 VIOLET
Refer to the wiring diagram in the KWL-Yoga Style installation and operating instruc-
tions, 20 236, for the connection to KWL-Yoga Style.
The KWL-KP-I power supply is connected to terminal 2A and N of the KWL-Yoga
Style terminal block and the fuse included in the scope of delivery of the KWL-KP-I
(use fast-acting fuse (250 V 200 mA) on the primary side) must be wired in series in
between.
The KWL-KP-I alarm contact is connected to terminals 39+38 of the KWL-Yoga Style
main board (see wiring diagram in the KWL-Yoga Style installation and operating ins-
tructions).
➊
Connection
Symbol
Verbindung Symbol
ERDUNG E
EARTH
SPANNUNG L
LIVE
NEUTRAL NEUTRAL N
Alarmkontakt
Alarm contact
Alarmkontakt
Alarm contact
4
Fig.3
Power supply
Fig.4
STROMVERSORGUNG
E L N
Control
KONTROLL
circuit
SCHALTKREIS
1A
FUSE
1 2 3 4 5
EN