Connecting Electric Dryers - LG DLHC5502 Series Owner's Manual

Hide thumbs Also See for DLHC5502 Series:

Owner's manual (116 pages)

Table Of Contents

Table of Contents

One (1) front bracket

Two (2) screws for side brackets

Two (2) screws for front brackets

To ensure safe and secure installation, please

observe the following instructions.

Make sure the surface of the washer is clean

and dry. Remove the paper backing from the

tape on one of the stacking kit side brackets.

Fit the side bracket to the side of the washer

top as shown. Firmly press the adhesive area

of the bracket to the washer surface. Secure

the side bracket to the washer with a screw on

the back side of the bracket. Repeat steps 1

and 2 to attach the other side bracket.

Place the appliance on top of the washer,

fitting the dryer feet into the side brackets as

illustrated. Avoid finger injuries; do not allow

fingers to be pinched between the washer

and the appliance. Slowly slide the appliance

toward the back of the washer until the side

bracket stoppers catch the dryer feet.

Insert the front bracket between the bottom

of the appliance and the top of the washer.

Push the front bracket toward the back of the

washer until it comes in contact with the side

bracket stoppers. Install the two remaining

screws to secure the front bracket to the side

brackets.

Insert the front panel.