Steering; Brakes; Crop Platforms Available; Feeder - MASSEY FERGUSON MF 5650 Series Workshop Manual

Combine general specifications
F. Steering
01
Type ........................................................................ Hydrostatic, with adjustable steering position.
Steering unit ........................................................... Danfoss or Ognibene.
Drive: ....................................................................... Through the main hydraulic pump - # 1.
G. Brakes
Type ......................................................................... Open discs and calipers, independent actuation in the
Hydraulic .................................................................. Drive.
Friction surface ........................................................ 78 cm²
Parking brake
Type ......................................................................... Drum brake.
Manual ..................................................................... Actuation.
Location ................................................................... Incorporated to the transmission (4x2 and 4x4 ZF only).
H. Crop platforms available
Type ......................................................................... Quick connector, MF general pattern
Drive ......................................................................... Through electromagnetic clutch and coupling through
Blades and drive ..................................................... of hardened steel, driven by the transmission on the left
Rigid headers
Sizes (meters / feet) ............................................... 4.87 / 16
Minimum cut height ................................................. 50 mm.
Flexible headers - Hyperflex
Sizes (meters / feet) ............................................... 3.96 / 13
Minimum cut height ................................................. 38 mm
Flexible headers - Powerflex
Sizes (meters / feet) .............................................. 4.87 / 16
NOTE: For more specific information about the headers, see the specific Manuals.
I. Feeder
Type ......................................................................... Bars screwed to chains.
01B01-4 01B01-4 01B01-4
01B01-4 01B01-4
front wheels.
the drive shaft.
side of the platform, with oil lubrication. Swinging
frequency = 535 cycles/min.
5.48 / 18
5.18 / 17 5,80 / 19
5.48 / 18
6,1 / 20
6,1 / 20
MF 5650