Setting Up The Scrambler; Using Exit; Using System Options; Adjusting The Contrast - Uniden WHAMx4BK Owner's Manual

6. Press SELECT/SCRAM to confirm the group MMSI
you entered. Otherwise, to cancel the group MMSI
entry, repeatedly press
then press SELECT/SCRAM.

Setting Up the Scrambler

This option lets you use the microphone with a scrambler
installed in the radio. You must connect an optional scrambler
board to the radio to use this option.
1. Briefly press MENU. MAIN MENU appears. Then
press SELECT/SCRAM.
2. Repeatedly press or
press SELECT/SCRAM.
3. Repeatedly press or
then press SELECT/SCRAM. A number flashes.
4. Repeatedly press or
then press SELECT/SCRAM to register it. YES appears.
5. Press SELECT/SCRAM to confirm the scrambler
code you entered. Otherwise, to cancel the scrambler
code, repeatedly press
then press SELECT/SCRAM.

Using Exit

Select this option to exit setup options and return to the
channel display screen.
1. Briefly press MENU. MAIN MENU appears. Then
press SELECT/SCRAM.
2. Repeatedly press or
press SELECT/SCRAM.
3. Repeatedly press or
press SELECT/SCRAM.

Using System Options

Using System Options
This section details the operation of the microphone's
system options. You normally change these options
based on local conditions and preferences.

Adjusting the Contrast

This option lets you change the microphone display's contrast.
You can adjust the contrast only for the microphone you are
Using System Options
or until NO appears
until SETUP appears, then
until SCRAMBLE appears,
to select the scrambler code,
or until NO appears
until SETUP appears, then
until EXIT appears, then
23