Using Channel Names - Uniden WHAMx4BK Owner's Manual

4. Repeatedly press or
press SELECT/SCRAM.
5. Repeatedly press or
of the vessel's user MMSI, then press SELECT/
SCRAM to register it.
6. Repeat Step 5 for each number in the user MMSI.
After you enter the last number, the cursor flashes at
the lower left side of the screen.
7. Repeatedly press or
of the name you want to assign to the vessel, then
press SELECT/SCRAM to register it.
8. Repeat Step 7 for each of the name's characters (up
to 12). If the vessel's name is less than 12 characters,
repeatedly press SELECT/SCRAM. After you enter
the last character, YES appears.
9. Press SELECT/SCRAM to confirm the name you
entered. Otherwise, to cancel the directory entry,
repeatedly press or
press SELECT/SCRAM.
10. Repeat Steps 4-9 to enter another vessel in the directory.
To change an entry already in the directory:
1. Repeat Steps 1-3 above.
2. Repeatedly press or
you want to change appears, then press SELECT/
SCRAM again. EDIT appears. Press SELECT/SCRAM.
The first character of the vessel's user MMSI flashes.
3. Repeat Steps 5-9 to edit the user MMSI and vessel name.

Using Channel Names

This option lets you change the preset channel names.
For example, this might be necessary if a channel's
authorized use has changed in your area.
1. Briefly press MENU. MAIN MENU appears. Then
press SELECT/SCRAM.
2. Repeatedly press or
press SELECT/SCRAM.
3. Repeatedly press or
then press SELECT/SCRAM.
Using Setup Options
until NEW appears, then
to select the first number
to select the first character
until NO appears then
until the name of the entry
until SETUP appears, then
until CH TAG appears,
19