A Look At The Display - Uniden WHAMx4BK Owner's Manual

A Look at the Display

- Appears while the microphone is transmitting.
DSC - Appears when the microphone is in the DSC mode,
including receiving DSC calls. It also shows that the
microphone is connected to the main radio (by RF).
DSC blinks when the microphone is close to out of range,
or when completely out of range.
LO - Shows the transmit output power is set to 1 watt on
the output channel.
HI - Shows the transmit output power is set to 25 watts on
the output channel.
TRI - Appears when the microphone is on a working
channel or the weather channel and is watching Channel
16 and Channel 9.
U I C - Shows the channel mode (USA, INT, or CAN).
MEM - Indicates if a channel has been placed into
channel scanning memory.
WX - Appears when the microphone is in the weather mode.
- Shows that GPS is connected to the microphone.
blinks when the GPS data being received is valid.
- Appears when the weather alert channel watch is
active and blinks when the alert is activated.
- Shows when the microphone is communicating with
the main radio (by RF). blinks when another microphone
is in use.
13
Setting Up the Microphone