ROBLAN LED TRACK TKM4 Installation Manual

Notes

• This product uses low voltage 48V DC magnet track system, adapter must be used with lamp track
together.
• To ensure safety, it must be installed by a professional electrician.
• Do not install the product in high temperature or humid place.
• Storage conditions: room temperature and dry environment.

Installation

• Picture 1. Turn off the power before installation. Press button A, then press vertically into the track until
you hear A click and make sure the installation is in place.
• Picture 2. Turn the lamp to the required direction and power on.
*If the luminaries needs to be replaced, press button A as shown in Figure 1 and pull down the lamp
vertically.

Description

The product uses quality high brightness LED as light
source, high reliable constant current power supply
solution. The light body is made of pure aluminum with
high thermal conductivity and is made of fine finishing.
The surface is dusted with powder, with exquisite
appearance and reliable heat dissipation performance.
Easy installation and the irradiation direction is
adjustable. No flickering, anti glare, beam angle 24°
and 40º for options, and LED SDCM < 3, Ra > 90 to
ensure color consistency.
INSTALLATION MANUAL
LED TRACK TKM4
www.roblan.com