Table of Contents
Advertisement
2º When you Connect the Device
3º When the Device is Configurated
ULP STD
NEW!
User manual
This are the STEPS to FOLLOW to Configurate
your DEVICE Successfully:
1. Use a USB to RS485 or UART Converter
cable to connect your wind sensor to your
computer.
2. Connect all the cables to the USB converter
cable EXCEPT for the BROWN cable.
3. Open the Configurator app and choose the
configuration desired.
4. Push the "Start Configuration" button.
5. Connect the brown cable when the configu-
rator tells you to.
6. Wait to complete configuration and when the
system advises that it is finished, disconnect
the USB and cables.
7. Your unit is now configured.
07/14
Advertisement
Table of Contents
