8 WRIGHT MANUFACTURING, INC. POWER EQUIPMENT LIMITED WARRANTY
SUPERSEDES ALL PREVIOUS WARRANTIES. EFFECTIVE FOR UNITS RETAILED ON OR AFTER 3/1/2023
Limited Warranty
Wright Manufacturing, Inc. (hereinafter: WMI) warrants to the original retail purchaser (Owner) that any new
WMI power equipment unit (Mower) originally accompanied by this warranty with a retail sales date on or after
the effective date above will be free from manufacturing defects in materials or workmanship subject to the
limitations and exclusions defined below. Any part of the Mower found, in the reasonable judgment of WMI, to
be defective in materials or workmanship, will be repaired or replaced by an Authorized WMI Service Dealer
without charge for parts and (except as excluded below) labor.
Dealer demo units with less than fifty hours when first retailed shall also be covered by this limited warranty.
Proofs of Purchase will be required by the Authorized WMI Service Dealer to substantiate any warranty claims.
All WMI warranty work must be performed by an Authorized WMI Service Dealer and the Mower, including any
defective part, must be delivered to the dealer prior to the expiration of the warranty period. This Warranty is
limited to the following specified periods from the date of the original retail purchase for defects in materials or
workmanship and will commence upon the date of original retail purchase.
This warranty shall apply only if the warranty registration form has been completed on-line by an Authorized
WMI Service Dealer and reflects the actual date of original retail purchase.
This warranty includes only the cost of parts and labor (when applicable). This warranty applies only to the
replacement of defective or otherwise warrantable WMI OEM parts being replaced with WMI OEM parts.
All WMI Power Equipment:
• All parts and components (except as noted Below).
• 2 years/Unlimited hours or 5 years/500 hours (whichever comes first).
• The warranty is limited to 90 days for any rental use.
• Service parts are warranted for 90 days.
• Engine - warranty covered by the engine manufacturer. For the best service, we advise that engine work be
performed through the respective Authorized engine dealer who is also an Authorized WMI Service Dealer.
Exclusions
•
Any damage or deterioration due to normal use, wear and tear or exposure.
•
All filters, engine oil, hydraulic oil, tires and tubes.
•
Bent, fractured or broken parts occurring through impact or hard use.
•
Clutch: linings, anti-rotation failure or other failure due to improper replacement installation.
•
Cost of regular maintenance service, parts or adjustments.
•
Worn bushings, cotters, clips, pins and retainers.
•
Paint, paint fading, cosmetic imperfections, abrasion, or corrision.
•
Fabric, cushion and rubber grip wear or damage.
•
Cutting blades, light bulbs, fuses.
•
Any damage due to previous improperly performed or unauthorized repairs.
•
Fire or water damage.
Other conditions
This Warranty does not cover any WMI power equipment that has been subject to misuse, neglect, negligence,
burning in any fire, flooded by water, damaged in an accident, or that has been operated or maintained in any
way contrary to the operating and maintenance instructions as specified in the Owner's Manual. The Warranty
does not apply to any damage to the Mower that is the result of improper maintenance; or to any WMI power
equipment or parts that have not been assembled or installed as specified in the Owner's Manual. The
Warranty does not cover WMI power equipment that has been altered or modified changing performance or
durability. In addition, the Warranty does not extend to repairs made necessary by normal wear, or by the use
of parts or accessories which, in the reasonable judgment of WMI, are either incompatible with the Mower or
adversely affect its operation, performance or durability. In the event the hour meter failed to record machine
hours, WMI reserves the right to make reasonable estimates of accumulated hours. If there is evidence of
8-1
Need help?
Do you have a question about the Z EXTREME and is the answer not in the manual?