Second Handset Operation; Setting Up - Uniden TRU 448 Series Owner's Manual

X2.4 ghz dual handset cordless system
Table of Contents

Advertisement

Second Handset Operation

Setting up

Charging
• Charge the second handset for 15-20 hours before using.
• When you charge the second handset, the display shows the name of the handset, HS2.
Dialing mode
Dialing mode is a universal setting. When the mode is changed on the original handset,
the setting for the second handset is changed as well.
CIDCW
• CIDCW setting is a universal setting. When the setting is changed on the original
handset, the CIDCW setting for the second handset is changed as well.
• CW Deluxe setting is independent from the original handset. To set the CW Deluxe setting
on the second handset, do the following.
1) When the phone is in the standby mode, press menu/mute.
2) Press - or + to move the pointer to "
3) Press - or + to select "
4) Press - or + to select "
then press select/ch.
Registration
For the TRU448-2 handset No.2, you can use it with the TRU448-2 base without
registering the handset. However, you need to register the TRU448-2 handset No.2 each
time you change the digital security code of the original base. Follow the instructions
under "Registering the Second Handset" on page 53.
", then press select/ch.
", then press select/ch.
" to active CW Deluxe features,
E X PA N D I N G Y O U R P H O N E
[ 55 ]

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tru 448-2 series

Table of Contents