Uniden EXS9500 Owner's Manual page 6

!
DO NOT use an outlet
controlled by a wall switch.
!
Before you plug the other
end of the telephone cord
into the modular jack on
the wall, charge the battery
(refer to "Charging the
Battery Pack," page 10).
3) Plug the AC adapter into the base.
4) Put the AC adapter cord inside the
molded wiring channel, then wrap it
around the strain relief notch. Plug
the AC adapter into a standard
120 VAC wall outlet.
5) Plug one end of the short telephone
cord into the
TEL LINE
back of the base, then plug the other
end into a standard telephone jack.
6) Line up the mounting slots on the base
with the mounting posts on the wall,
then push in and down until the
phone is firmly seated.
7) On the base unit, pull the handset
retainer out of the slot and rotate
it clockwise 180 degrees.
jack on the
5