Extra Options And Functions - LG TV2514DV3B Owner's Manual

OPERATION
24
Extra Options and
Functions
You can use the extra options and functions on
some programmes to customize the cycle.
Customising a Washing
Programme
Each programme has default settings that are
selected automatically. You may also customise
these settings using these buttons.
Water
This appliance detects the amount of laundry
automatically, then sets the water level. However,
manually increasing the water level may be
required and recommended to avoid linting and
unbalanced errors when the load is bulky but
lightweight.
• Press Water option until the desired water level
is selected. The water level is indicated on the
display.
• When water level is automatically detected, it
may differ depending on the amount of laundry
even though the same water level is indicated on
the control panel.
Wash
Adjusting the wash time setting modifies the cycle
times and/or wash actions.
• Press Wash button until the desired wash time is
selected. The wash time is indicated on the
display.
Rinse
Use this option to change the number of rinses.
• Press Rinse button to change the number of
rinses. The number of rinses is indicated on the
display.
Spin
Use this option to change the spin time.
• Press Spin button until the desired spin time is
selected. The spin time is indicated on the
display.
• When you press the START/PAUSE button after
selecting this option, the remaining time is
indicated on the display.
Using Special Options
You can customize the programmes by using the
following special options:
Strong Wave
Use this option to change the strong water wave.
• It is set to medium water wave by default.
Scent+
Use when you want to leave a strong fragrance of
the softener on the fabric.
Follow the next steps to use a special
option.
1
Press the POWER button.
2
Select a washing programme.
3
To use special options,
• Scent+: Press Scent+ button.
• Strong Wave: Press Strong Wave button.
4
Press the START/PAUSE button.
Using Basic Options
Delay End
Use this function to delay ending time. The
appliance will start automatically and finish after a
specified time interval.
1
Press the POWER button.
2
Select a washing programme.
3
Press the Delay End button to set the required
delay ending time.
4
Press the START/PAUSE button.
NOTE
• This function is the time to the end of the
programme, not the start. The actual running