Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DeKo DKCS3.6O1
Summary of Contents for DeKo DKCS3.6O1
- Page 1 V2202 INSTRUCTION MANUAL 3.6V CORDLESS SCREWDRIVER MODEL NO.: DKCS3.6O1 DKCA3.6O1 DKCS3.6F1 IMPORTANT: Read this instruction manual before operating this product. Keep the instruction manual for future reference. DEKO TOOLS CO., LIMITED www.dekotools.com Made in China...
-
Page 2: General Power Tool Safety Warnings
General Power Tool Safety Warnings ⚠ WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool"... - Page 3 g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. h) Keep handles and grasping surfaces dry, clean and free from oil and grease.
-
Page 4: Symbols Explanation
2).Do not recharge battery in damp or wet environment. Do not expose charger to rain or snow. If battery case is cracked or otherwise damaged, do not insert into charger. Battery short or fire may result. Charge only DEKO approved rechargeable batteries. See Specifications. Other types of batteries may burst causing personal injury and damage. -
Page 5: Specifications
Do not dispose of power tools and batteries/rechargeable batteries into household waste! Dispose the products according to the regulation and requirement of local council. Specifications Voltage 3.6V⎓ Max. torque 3 N.m No-load Speed 220/min (RPM) Chuck 1/4 in. (6.35mm) Hex Battery Lithium-ion battery, 1300mAh... -
Page 6: Installing And Removing Bits
Installing and Removing Bits ⚠ WARNING: Before installing bits, please lock trigger switch by placing the direction and safety switch in the center position. Do not engage the trigger when changing bits. 1. Insert the bit into the chuck until it snaps into place. 2.To remove a screwdriver bit, lock trigger switch by placing the direction and safety switch in the center position and pull the bit out. - Page 7 Rotating the Handle Position ⚠ WARNING: Before rotating the handle, make sure to lock the power switch to prevent accidental starting. You can use the screwdriver in a pistol-grip or standard position, depending on what better suits the task at hand. Push the conversion button and then rotate the upper portion of the screwdriver until it is twisted in place.
-
Page 8: Maintenance
2) We recommend that you clean the device immediately each time you have finished using it. 3) Clean the equipment regularly with a moist cloth and some soft soap. Do not use cleaning agents or solvents; these could attack the plastic parts of the equipment. Ensure that no water can seep into the device. Maintenance There are no parts inside the equipment, which require additional maintenance. - Page 9 DEKO TOOLS CO., LIMITED www.dekotools.com Made in China...
Need help?
Do you have a question about the DKCS3.6O1 and is the answer not in the manual?
Questions and answers