Table of Contents
Advertisement
Continue until the
name Bob Jones is
displayed in the
LCD.
7. Press mem .
Calling a Number Stored in Memory
Use this feature to dial a number previously stored
in memory. See Storing a Caller ID memory
number in Dial Memory on page 22 or Entering a
Number in Dial Memory on page 22 for details.
1. Remove the Handset from the Base Unit.
2. Press mem .
Editing and Deleting Numbers in Dial Memory
Use this feature to edit or delete numbers stored in dial memory.
1. Remove the Handset from the Base Unit.
2. Press flash/function .
3. Press 0 .
4. Enter the memory
location to edit or
delete. For
example, to edit or
delete location 05,
press 05 .
— OR —
Use the
and
keys to scroll to the
memory location.
DXI860
NAME?
Bob Jones
LOCATION?
6 CALLS
LOCATION?
6 CALLS
DIAL MEMORY?
MEM-1 EDIT-0
LOCATION?
6 CALLS
8. Enter a memory
location for the
number. For
example, press 05
to assign location
05 to the number.
You hear a
confirmation beep
and "Storing"
displays.
3. Enter the memory
location. For
example, for
memory location
05, press 05 .
Note: If you want to dial a different number stored
in dial memory, use the
scroll through the numbers stored in memory.
4. Press talk to dial the number.
To delete the entry in dial memory:
Press and hold
chan/delete for two
seconds. A
confirmation tone
sounds and the
memory location is
cleared.
To edit the number entry in dial memory, for
example, to change 5941 to 1234:
Press mem .
Press chan/delete
four times.
Enter 1234 .
STORING
6 CALLS
and
keys to
05
No memor y
Bob Jones
8365941
Bob Jones
836
Bob Jones
8361234
23
Advertisement
Table of Contents
