Uniden DRX402 User Manual page 10

3. Align the stand with the
notches on the
charger.
4. Slide the stand
onto the notches
until it clicks into
place.
5. Insert two #10
screws into the
wall, 30 mm
apart. (For best
results, use a
level to ensure
the screws are
even.)
Remember to
use appropriate
anchors for the
wall material.
6. Keeping the AC
adapter cord out of the way, place the charger over the
screw heads and slide it down into place.
Switching back to the desk stand
If you want to switch back to using the charger on a desktop:
1. Remove the stand.
2. Rotate the stand so that the locking tabs that say
are facing the charger with the arrows pointing up.
3. Align the stand with the notches on the charger.
4. Slide the stand onto the notches until it clicks into place.
10
DESk