Dehumidifying Operation - Hitachi RAR-M0A5 Operation Manual

DEHUMIDIFYING OPERATION

Use the device for dehumidifying when the room temperature is over 16°C.
When it is under 15°C, the dehumidifying function will not work.
■ Dehumidifying Function
When the room temperature is higher than the temperature setting: The device will dehumidify the room
and reducing the room temperature to the preset level.
When the room temperature is lower than the temperature setting: Dehumidifying will be performed at the
temperature setting slightly lower than the current room temperature, regardless of the temperature setting.
The function will stop (the indoor unit will stop emitting air) as soon as the room temperature becomes lower
than the setting temperature. You might feel a bit colder in dehumidifying operation.
Press the
(DEHUMIDIFY).
1
The FAN SPEED is set at LOW automatically.
The FAN SPEED button does not work during DEHUMIDIFY
operation.
Set the desired room temperature with the TEMPERATURE
button (the display indicates the setting).
2
Press the
START
a beep. Press the button again to stop the operation.
■ As the settings are stored in memory in the remote controller, you
only have to select
button next time.
– 5 –
selector button so that the display indicates
The range of 20 ~ 26˚C is recommended as
the room temperature for dehumidifying.
button. Dehumidifying operation starts with
(DEHUMIDIFY) then press the