Dehumidifying Operation - Hitachi SPX-RCDB Manual

DEHUMIDIFYING OPERATION

Use the device for dehumidifying when the room temperature is over 16°C.
When it is under 15°C, the dehumidifying function will not work.
Dehumidifying Function
When the room temperature is higher than the temperature setting: The device will dehumidify the room,
reducing the room temperature to the preset level.
When the room temperature is lower than the temperature setting: Dehumidifying will be performed at the
temperature setting slightly lower than the current room temperature, regardless of the temperature setting.
The preset room temperature may not be reached depending on the number of people present in the room
or other room conditions.
Press the MODE SELECTOR button so that the display indicates
(DEHUMIDIFY).
Press (FAN SPEED) button to select SILENT or LOW fan
speed.
Set the desired room temperature with the ROOM TEMPERATURE
setting button (the display indicates the setting).
START
Press the
starts. Press the button again to stop operation.
STOP
I As the settings are stored in the memory in the remote controller, you
only have to press the
– 6 –
The range of 20-26ÝC is recommended as the
room temperature for dehumidifying.
(START/STOP) button. Dehumidifying operation
(START/STOP) button next time.