ARRI ALEXA Mini LF User Manual page 115

Network
Host
Client
Icons on the HOME screen and the Status Info indicate the WiFi status:
WiFi Password (Host Mode)
The camera requires a password when connecting to it via WiFi. The default password is "arriarri".
► Select MENU > System > Network / WiFi > WiFi Host Password to set the WiFi password. The WiFi
password must be between 8 and 32 characters long.
WiFi Host Channel
► Select MENU > System > Network / WiFi > WiFi Host Channel.
► Select Automatic to have the camera automatically select the WiFi host channel with the best
performance, or select a WiFi channel between 1 and 11.
With the Automatic setting, the camera will rediscover the best WiFi host channel each time the
camera is booted or WiFi is turned on. Select Automatic from the list again to trigger a new scan.
When using WiFi and
to avoid interference and guarantee optimal performance. The following table gives an overview of
suitable channel configurations:
Connect to a Network (Client Mode)
► Select MENU > System > Network / WiFi > WiFi Network and select the desired network from the
list.
If the selected WiFi network uses encryption, you are prompted to enter the password.
► Enter the password and press CONNECT.
The camera acts as an WiFi access point. The SSID of the camera is "Mini-LF-xxxxx".
(xxxxx is the five digit serial number of the camera)
The camera can connect to a WiFi network and receives it's IP address via DHCP.
Host mode is enabled.
Client mode is enabled, connection to a network has been established.
Client mode is enabled, camera is not connected to a network.
White Radio simultaneously, it is important to configure the used channels
115