Related Manuals for ARRI ALEXA 35 Xtreme
Summary of Contents for ARRI ALEXA 35 Xtreme
- Page 1 ALEXA 35 Xtreme Software Update Package SUP 5.0.0 R E L E A S E N O T E S August 1, 2025 Document ID: D45 10006706 Release: K11660...
- Page 2 We are pleased to introduce Software Update Package SUP 5.0.0 for the ALEXA 35 Xtreme. This release marks the official debut of the ALEXA 35 Xtreme, a camera model that builds on the acclaimed image quality and workflow of the ALEXA 35—now powered by a faster processor and expanded internal memory to enable advanced performance and exclusive new features.
- Page 3 Accompanying the ALEXA 35 Xtreme is ARRICORE next-generation RGB codec developed by ARRI to make the camera's superb image quality more affordable through reduced data rates. At the same time, flexibility in post is assured, since sensitivity, white balance, and tint are not baked in.
- Page 4 User Button: “LPM-1 Return In” This user button is intended for use with the ARRI Live Production System (LPS-1) and Live Production Monitor LPM-1. It allows switching between the live image and an external return signal directly on the monitor— This is particularly useful when SDI 2 is set as an output and thus cannot serve as an input for return video.
- Page 5 Web Remote. Update of Accessories The camera update does not update the following devices, which must be updated separately. Update files for these devices must be downloaded individually from the ARRI Software Packages webpage. Camera Control Monitor (CCM-1): Download the update file, copy it to a USB-C stick (root folder), and connect the stick to the CCM-1.
- Page 6 It is possible to install a previous software version on ALEXA 35 and ALEXA 35 Live cameras if needed. However, ALEXA 35 Live is not compatible with any software version earlier than SUP 2.0.0. ALEXA 35 Xtreme cannot be downgraded, as SUP 5.0.0 is its initial release and the minimum supported version.
- Page 7 Don't judge playback smoothness when shooting higher than 30 fps based on in-camera playback. If in doubt, use the ARRI Reference Tool to decode sample ARRICORE clips to check on the image playback. Release Notes for ALEXA 35 SUP 5.0.0 Page 7 of 10 All data subject to change without further notice.
- Page 8 In the image below the playback is on the left (HW Playback), and the ARRICORE file as decoded by the ARRI Reference Tool is on the right (SDK Playback). Don't judge ARRICORE noise based on in-camera playback. If in doubt, use the ARRI Reference Tool to decode sample ARRICORE clips to check on noise levels.
- Page 9 Sensor Overdrive and High Frame Rate Settings Unavailable on CCM-1 Monitor When using the CCM-1 monitor, it is currently not possible to enable Sensor Overdrive, nor to set frame rates above 120 fps (ALEXA 35 Xtreme). Delayed Ready-to-Record State After Reboot with Many User Setups on Connected Storage When user storage is connected and contains a large number of user setups, the camera may take longer to become ready to record after a reboot.
- Page 10 When playing back a clip with audio, the headphone output on the MVF-2 is 3dB lower than during live recording. ENG Zoom Lens Control via ARRI Master Grips may not work with some lenses The camera can control the three axes of an ENG zoom lens connected via the Hirose mount using ARRI Master Grips.
Need help?
Do you have a question about the ALEXA 35 Xtreme and is the answer not in the manual?
Questions and answers