Table of Contents
Advertisement
ck setting
The AUTO CLOCK function will automatically
set the built-in clock
(Month, Day, Year and Time) when the DVD/VCR is connected to an
Antenna or Cable system and it is turned off. The DVD/VCR searches for
a station in your area containing the necessary AUTO CLOCK setting
signals. Once received, it will take approximately
4 minutes for the clock
to set itself automatically.
ii _D 'III,,I_D
ii
::AUTO:;¢LQCK se_!ng::
;:;:::::::::: :! ! To set AUTO CLOCKto
off
Preparation:
TurnON theTV and selectthe corresponding videoinput.
Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
Connect the Antenna or Cable system.
• If you use a cable box,turnit on.
Plug the AC Power cord to the AC outlet.
Make sure the DVDNCR
is turned off.
Q
• If you press POWER, the Auto Clock
set is not programmed.
Wait at least three
minutes
and press
, POWER.
Press CALL to check the clock setting on
the on screen
display.
CALL
DISPLAY
O
If the clock is not set, check the antenna
condition. The AUTO CLOCK may not
function properly if the reception condition
is not good.
F
The auto clock adjustment
will be updated
at 6:00
AM, 12:00 PM and 6:00 PM everyday
when the
DVDNCR
turned off.
• If you use a cable box and you want AUTO CLOCK
adjustment
to be performed,
the cable box must be
left on.
• The AUTO CLOCK
adjustment
is not effective
when
there is a difference
of more than 5 minutes
exists
between
the built-in clock time and the actual time,
When shipped from factory the AUTO CLOCK is set to "ON".
But if you do not want AUTO CLOCK setting:
PressVCRMENU.
VCR MENU
SETUP
Press SET + or- to select "SYSTEM SETUP",
then press ENTER.
Press SET + or - to select "AUTO CLOCK".
5
Press VCR MENU repeatedly
to return to the
normal
screen.
• When the AUTO CLOCK is set to
VOR MENU
SETUP
"OFF", the AUTO CLOCK
adjust-
ment does not function.
• Set the clock manually [_.
124
Advertisement
Table of Contents
