TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE WARNING CAUTION PRODUCT OVERVIEW Product Features OPERATION Before Use Control Panel Sabbath Mode Automatic Icemaker Storing Food Drawers Shelves Door Bins 19 SMART FUNCTIONS LG ThinQ Application Smart Grid Function Smart Diagnosis Feature 24 MAINTENANCE...
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE Safety Messages Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and follow all safety messages.
Page 4
IMPORTANT SAFETY INSTRUCTIONS • Keep fingers out of pinch point areas; clearances between the doors and cabinets are necessarily small. Be careful closing doors when children are nearby. • Do not touch frozen food or the metal parts in the freezer compartment with wet or damp hands. Doing so may cause frostbite.
Page 5
IMPORTANT SAFETY INSTRUCTIONS • Turn off power before cleaning or repairing the appliance. • The freezer compartment lights are interior LED lighting, and service should be performed by a qualified technician. • Turn off power immediately in the event of a blackout or thunderstorm. •...
IMPORTANT SAFETY INSTRUCTIONS CAUTION CAUTION • To reduce the risk of minor or moderate injury to persons, malfunction, or damage to the product or property when using this product, follow basic precautions, including the following: Installation • Do not install the appliance where there may be a danger of the unit falling. •...
PRODUCT OVERVIEW PRODUCT OVERVIEW Product Features The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes. Interior Water filter Purifies water. NOTE •...
Page 8
The appearance and specifications listed in this manual may vary due to constant product improvements. Electrical requirements: 115 V, 60 Hz Min. / Max. water pressure: 20 - 120 psi (138 - 827 kPa) Model Description Net weight SKSCF1801P Built-in, Freezer 304 lb (138 kg) SKSCF2401P Built-in, Freezer 346 lb (157 kg)
OPERATION OPERATION Before Use Checklist Clean the freezer. Clean the freezer thoroughly and wipe off all dust that accumulated during shipping. CAUTION • Do not scratch the freezer with a sharp object or use a detergent that contains alcohol, a flammable liquid or an abrasive when removing any tape or adhesive from the freezer.
10 OPERATION Control Panel Depending on the model, some of the following functions may not be available. The actual control panel may differ from model to model. Control Panel Features Water Filter Reset Replace the water filter when the icon turns on. After replacing the water filter, press and hold the Water Filter Reset button for three seconds to turn the icon light off.
Page 11
OPERATION POWER The POWER button turns off all electrical power to the unit. Press and hold the POWER button for 3 seconds to turn off the power. When the power is off, the icon light is off. There is no need to turn off power at the circuit breaker or wall receptacle. Use this function for service or extended vacations.
12 OPERATION Sabbath Mode • Throw away the first few batches of ice after installation. This is also necessary if the freezer This feature is only available on some models. has not been used for a long time. • Never store beverage cans or other items in the Using the Sabbath Mode ice bin for the purpose of rapid cooling.
OPERATION • Occasionally shake the ice bin to level the ice. If NOTE the ice cubes pile up on the side nearest the shutoff sensor, ice production will stop. • The ice bin should be emptied any time if the Ice On/Off icon is turned off.
14 OPERATION have food odor and taste transfer throughout the NOTE freezer and could also dry out frozen food. • If you are leaving home for a short period, like a Packaging Recommendations short vacation, the freezer should be left on. •...
Page 15
OPERATION Removing/Assembling the Drawer Lift the empty drawer slightly to remove it Support from the support. Removing the Drawer Support Press the levers on either side of the drawer support. Assembling the Drawer Pull out the drawer support until it stops. Angle the drawer into the space and set it on Keeping both levers pressed, lift the drawer the support.
16 OPERATION Lower the front of the shelf so that the hooks drop into the slots. NOTE Shelves Detaching/Assembling the Shelf The shelves in the refrigerator are adjustable to meet individual storage needs. Adjusting the shelves to fit items of different heights will make finding the exact item you want easier.
OPERATION • Do not clean glass shelves with warm water while they are cold. Shelves may break if exposed to sudden temperature changes or impact. • Glass shelves are heavy. Use special care when removing them. To detach, tilt up the front of the shelf and lift Transmitter the shelf straight up.
Page 18
18 OPERATION To assemble the door bin, align both sides of the bin with the guides and push the bin down until it snaps into place. CAUTION • Regularly detach and wash the storage bins and shelves; they can become easily contaminated by food.
SMART FUNCTIONS SMART FUNCTIONS LG ThinQ Application Installing LG ThinQ Application and Connecting an LG Appliance This feature is only available on models with Wi-Fi. The LG ThinQ application allows you to Models with QR Code communicate with the appliance using a Scan the QR code attached to the product using smartphone.
Page 20
20 SMART FUNCTIONS Wireless Power Transfer Specifications NOTE • If the distance between the appliance and the Delivered power Less than and equal to 3 W per wireless router is too far, the signal becomes shelf weak. It may take a long time to connect or fail Transmission Electromagnetic induction to install the application.
SMART FUNCTIONS FCC RF Radiation Exposure SIGNATURE KITCHEN SUITE will also provide open source code to you on CD-ROM for a charge Statement covering the cost of performing such distribution This equipment complies with FCC radiation (such as the cost of media, shipping, and handling) exposure limits set forth for an uncontrolled upon email request to opensource@lge.com.
Smart Diagnosis feature in the menu. Follow smart phone app. the instructions provided in the LG ThinQ application. SIGNATURE KITCHEN SUITE Open API You can manage Smart Grid features for the SIGNATURE KITCHEN SUITE Smart Freezer. Using Audible Diagnosis to...
Page 23
SMART FUNCTIONS • Launch the LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow the instructions for audible diagnosis provided in the LG ThinQ application. Open the freezer door. Hold the Lock button for three seconds. •...
24 MAINTENANCE MAINTENANCE Cleaning baking soda is completely dissolved so it does not scratch the surfaces of the freezer. WARNING Door Liners and Gaskets • Use non-flammable cleaner. Failure to do so can result in fire, explosion, or death. Use a clean sponge or soft cloth and a mild detergent in warm water.
Page 25
MAINTENANCE • Do not install where water hammer conditions Remove the old water filter. may occur. If water hammer conditions exist you Push to open the water filter cover at the top must install a water hammer arrester. Contact a right of the freezer.
Page 26
26 MAINTENANCE Grasp and rotate cap clockwise until it stops. Replace the cap to the side of the water filter. After changing the filter, press and hold the Water Filter Reset button for three seconds to reset the icon light. •...
Page 27
MAINTENANCE Performance Data Sheet Model: LT1000P-S NSF System Trade Name Code: MDJ64844601 The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system as specified in NSF/ ANSI Standard 42, Standard 53 and Standard 401.
Page 28
• While the testing was performed under standard laboratory conditions, actual performance may vary. For replacement filters, visit your local dealer or distributor or find a dealer on the signaturekitchensuite.com website. For further assistance, contact the SIGNATURE KITCHEN SUITE Customer Information Center. USA: 1-855-790-6655 Canada: 1-888-289-2802 Replacement Cartridge: LT1000P-S or ADQ74793506 NSF is a trademark of NSF International.
TROUBLESHOOTING TROUBLESHOOTING FAQs Frequently Asked Questions What are the best temperature settings for my freezer? The default setting for the freezer is 0° Fahrenheit (-18° Celsius). Adjust these settings as necessary to keep food at desired temperatures. Ice cream should be firm and ice cubes should not melt in the freezer.
30 TROUBLESHOOTING Before Calling for Service Review this section before calling for service; doing so will save you both time and money. Cooling Problem Possible Cause & Solution Freezer is not cooling The freezer control is set to OFF (some models). or has no power.
Page 31
TROUBLESHOOTING Problem Possible Cause & Solution Interior moisture Defrost cycle recently completed. buildup. • During the defrost cycle, the temperature of each compartment may rise slightly and condensation may form on the back wall. Wait 30 minutes and confirm that the proper temperature has been restored once the defrost cycle has finished.
Page 32
32 TROUBLESHOOTING Water Problem Possible Cause & Solution Water is dispensing Water filter has been exhausted. slowly. • Replacing the water filter is recommended: - Approximately every six months. - When the water filter indicator turns on. - When the water dispenser output decreases. - When the ice cubes are smaller than normal.
Page 33
TROUBLESHOOTING Problem Possible Cause & Solution Water has bad taste Water supply contains minerals such as sulfur. or odor. • A water filter may need to be installed to eliminate taste and odor problems. Water filter has been exhausted. • Replacing the water filter is recommended: - Approximately every six months.
Page 34
34 TROUBLESHOOTING Problem Possible Cause & Solution Icemaker is not Doors are not closed completely. making enough ice. • If the doors are not properly closed, ice production will be affected. See the "Doors will not close correctly or pop open" section in Parts & Features Troubleshooting for more information.
Page 35
TROUBLESHOOTING Parts & Features Problem Possible Cause & Solution Doors will not close Food packages are blocking the door open. correctly or pop • Rearrange food containers to clear the door and door shelves. open. Ice bin, crisper cover, pans, shelves, door bins, or baskets are out of position. •...
Page 36
36 TROUBLESHOOTING Problem Possible Cause & Solution Popping Contraction and expansion of the inside walls due to changes in temperature. • Normal Operation Sizzling Water dripping on the defrost heater during a defrost cycle. • Normal Operation Vibrating If the side or back of the freezer is touching a cabinet or wall, some of the normal vibrations may make an audible sound.
LIMITED WARRANTY TERMS AND CONDITIONS Should your SIGNATURE KITCHEN SUITE Refrigerator ("Product") fail due to a defect in materials or workmanship under normal and proper use, during the warranty period set forth below, SIGNATURE KITCHEN SUITE will, at its option, repair or replace the Product. This limited warranty is valid only to the original retail purchaser of the Product (“You”) and applies only when purchased lawfully and used within...
Page 38
The cost of repair or replacement under these excluded circumstances shall be borne by You. TO OBTAIN WARRANTY SERVICE AND ADDITIONAL INFORMATION Call 1-855-790-6655 and select the appropriate option from the menu. Or visit our website at http://www.signaturekitchensuite.com. Or by mail: SIGNATURE KITCHEN SUITE Customer Service P.O. Box 240007 Huntsville, AL 35813 ATTN: CIC...
Canada TERMS AND CONDITIONS Should your SIGNATURE KITCHEN SUITE Refrigerator ("Product") fail due to a defect in materials or workmanship under normal and proper use, during the warranty period set forth below, SIGNATURE KITCHEN SUITE will, at its option, repair, replace or pro rate the Product upon receipt of proof of the original retail purchase.
Page 40
• Damage or failure caused by transportation and handling, including scratches, dents, chips and/or other damage to the finish of the Product, unless such damage results from defects in materials or workmanship and is reported to SIGNATURE KITCHEN SUITE within one (1) week of delivery of the Products;...
Need help?
Do you have a question about the SKSCF1801P and is the answer not in the manual?
Questions and answers