Table of Contents
Advertisement
| [4] UHF TV ANTENNA CONNECTION
Detach the antenna cable from the antenna terminal of
your TV set, and connect
the cable to the ANTENNA
terminal on the player.
|
(2) CONNECTING TO TV SET
Connect
the TV terminal
of the player to the antenna
terminal of your TV set with the accessory RF antenna
cable.
NOTE:
i
® The shape of the antenna input termina! and the method of
connecting the antenna cable may differ from one TV set to
another. For details, please refer to your TV instruction manual. |
[S] CONNECTING TO STEREO AMPLIFIER
Connect the AUDIO OUT jacks of the player to the AUX or
CD input jacks of stereo amplifier.
NOTE:
® Do not connect these terminals to your amplitier PHONO input
Jacks.
[4] PLUG THE POWER CORDS INTO AC
OUTLET
Plug the AC power cords of the player, stereo amplifier and
TV set into an AC outlet
TIMER CONNECTION
CLO-1450
Stereo amplifier
+(s009)
Audio timer
[ie:oo Bees)
AC outlet
<n
=)
10
<VRB1022>
S|; UHF
CHANNEL
ADJUSTMENT
FOR
PLAYBACK
| (1) Turn on the TV and tune to channel 36.
| (2) Turn on the player.
(3)
lf the TV is correctly tuned, a blue background picture |
will appear on the screen.
® If you are using a VCR tuned to channel 36, the player
must be retuned to a different channel.
To change the player channel, use the accessory screwariver to
turn the screw inside the opening in the rear panel marked
| CHANNEL SELECTOR (from CH 32 to CH 40). Note that the screw
only needs to be turned a little.
Turn the screw.
SUB CODE OUT jack/ & Terminals
used to extend the utility of this player in the future.
CAUTION
; BE SURE
TO USE THE SHIELDED
CABLE
WITH THE
LENGTH OF LESS THAN
2 METERS
WHEN
CONNECT-
ING THE SUB CODE
OUT JACK TO SOME ADAPTER IN
ORDER TO COMPLY
WITH THE RADIO
INTERFERENCE
REQUIREMENT.
Advertisement
Table of Contents
