SSID: "DIRECT-brRJ-3050[the last four digits of the serial number]" (for RJ-3050) or "DIRECT-brRJ-3150[the last four digits of the serial number]" (for RJ-3150).

(You can find the serial number label on the bottom of the printer.)

Password (Network key):

RJ-3050 / RJ-3150: 00000000

Bluetooth Tab

Bluetooth Settings

1. Visible to Other Devices

Select whether the printer can be "discovered" by other Bluetooth devices.

Available settings: [Discoverable], [Not Discoverable]

2. PIN code

Specify the PIN code that will be used when pairing with devices that are compliant with Bluetooth 2.0 or earlier.

3. Display the PIN code on-screen

If this check box is selected, PIN codes will be displayed in computer windows.

4. Request Secure Simple Pairing (SSP) settings during pairing

If this check box is selected, pairing can be performed using the printer buttons for devices that are compliant with Bluetooth 2.1 or later.

Applying Setting Changes to Multiple Printers

1. After applying settings to the first printer, disconnect the printer from the computer, and then connect the second printer to the computer.

2. Select the newly connected printer from [Printer] drop-down box.

If [Automatically detects the connected printer, and retrieves the current settings] check box in [Option Settings] dialogue box is selected, the printer connected with the USB cable is

automatically selected.

For details, see

File

3. Click [Apply] button.

The same settings that were applied to the first printer are applied to the second printer.

If [Automatically restart the printer after applying new settings] check box is cleared, the printers will not be restarted after the settings are changed, reducing the time required to configure

the printers. However, we recommend selecting [Automatically restart the printer after applying new settings] check box when configuring the first printer so that you can confirm that a

connection with the access point can be correctly established with the settings. For details, see

4. Repeat steps 1 - 3 for all the printers whose settings you wish to change.

If the IP address is set to [STATIC], the printer's IP address will also be changed to the same address as the first printer.

Change the IP address if necessary.

To save the current settings in a file, click [File] - [Export].

The same settings can be applied to another printer by clicking [File] - [Import], then selecting the exported settings file. (See

For Apple devices

The following devices may not support Ad-hoc mode:

(iOS 14 or later) iPhone 12 series, iPhone 11 series, and iPhone SE 2nd generation

(iPadOS 14 or later) iPad Pro 5th generation and iPad Air 4th generation

iPad and iPad mini released after 2021

To connect your printer to these devices, we recommend using Wireless Direct.