Brother RJ-3150 Manual page 56

RJ-3150
How do I transfer label templates to the printer via network? (BRAdmin Professional)
To transfer templates to the printer via network, you need BRAdmin Professional.
Please download from the [Downloads] page and install it.
The following screens may differ depending on the model.
1. Create the template you want to transfer with P-touch Editor, then choose [File] - [Transfer Template...] menu to register. Transfer Manager will start up.
2. In Transfer Manager, click
3. Start BRAdmin Professional.
Choose the printer from the list and click on the [Control] menu. Select [Load Firmware (Manual)].
4. Choose [TFTP PUT] and click [OK].
5. Enter the password and choose the .blf file which you saved in step 2, then click [OK].
The default user ID and login password to manage printer settings is one of the following combinations:
Combination ID
1 -
2 admin
3 -
4 -
For more information, see [IMPORTANT – Network Security Notice: Default Login Password Change] on the [Manuals] page.
Related FAQs
How do I transfer label templates with P-touch Transfer Express?
How do I transfer templates or other data from the computer to the printer?
How do I transfer label or slip templates?
, or choose [File] - [Save Transfer File] menu to save the registered template in .blf format.
The password preceded by "Pwd" and located either on the bottom of the printer or in the battery or media compartment.
Password
-
access
initpass
50 / 168
Go to Index
Go to Index