Table of Contents
Advertisement
D]Ulole}iave ME-lel-.-mQigelenm Ol-16,.@- Wen s))
his section describes about the operation of the recording
'om deck A to B.
a
ee
ee
1 Press m & to open the cassette compartment
and insert the tapes with the sides to be played
back or recorded facing you.
Recorded tap
2 Press TAPE SELECTOR to select the tape type.
TAPE SELECTOR
oo TYPE I O TYPE 1
Be sure to use tapes of the same type for dubbing,
since the switch setting is effective on both decks.
3 Press DUBBING SPEED to select the dubbing
speed
DUBBING SPEED
e HIGH
O NORMAL
4 Press it.
Fare
5 Press @ and > together to set the unit in
recording pause mode.
To stop dubbing, press m & on both decks.
Notes
© The tape in deck B is automatically recorded with the
same recording system as the original tape in deck A. So
it is unnecessary to select DOLBY NR.
¢ Do not change the setting of the DUBBING SPEED switch
during tape dubbing.
© If the sound is affected by a television set during high-
speed dubbing, turn off the set or move it away from the
unit.
How to edit the tape
1 During normal-speed dubbing, press 86 on deck B.
2 Locate the desired portion to be dubbed with >
or <<
on deck A. Then press @ &. Or replace the cassette with
anew one.
3 Press > on deck A and release &# on deck B to start
dubbing again.
Advertisement
Table of Contents
