Table of Contents
Advertisement
Playing Back Tapes (on either Deck A or B)
This section describes basic playback from either deck A or B.
3 Press DOLBY NR to select the DOLBY NR
setting.
DOLBY NR
4
Press [> to start playback.
inte
nin
tn ian
AEs
SE
Sa. s a s a n
ws cheitenthean's
When the tape ends, playback stops automatically.
To stop playback, rewinding or fast forwarding,
press Hf.
1
Press TAPE. |
To pause, press I.
\'7
To resume playback, press HM again or >.
=
ne
To rewind the tape, press <4.
To fast-forward the tape, press P>.
Notes
* During playback or recording on one deck, do not operate
the other deck. (When both decks A and B are in playback
mode, only playback from deck A will be audible.)
* Before turning the power off, be sure to stop playback or
recording by pressing Ml.
2
Press & to. open the cassette compartment,
insert the tape with the side to be played
What is the Dolby* NR system?
facing you and close the cassette
compartment.
Dolby NR (noise reduction) system reduces tape hiss noise in
EJECT
low-level, high-frequency signals. The system boosts these
signals in recording and lowers them in playback.
When listening to a tape recorded with Dolby NR, set the
DOLBY NR switch to ON.
=>
* Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
"DOLBY" and the double-D symbol Dd are trademarks of Dolby
Laboratories Licensing Corporation.
Advertisement
Table of Contents
