Table of Contents
Advertisement
1. Plug one end of the telephone cord into the
2. Plug the other end into an
analogue phone wall jack.
3. To connect a telephone
through the modem, plug
the telephone's cord into
the modem's
4. Plug your computer in,
and turn it on.
5. While the computer is
booting up, insert the
USRobotics Installation
CD-ROM.
Step Three: Install the Modem Drivers
Windows XP
If at any time during the installation you are prompted to select the
N o t e :
location of your installation drivers, assuming D: is your CD-ROM
drive, type D:\2000_XP.
1. In the Found New Hardware Wizard on your computer, select
and click
this time
2. Select
Install the software automatically (Recommended)
. Follow the on-screen instructions to install the U.S. Robotics
Next
V.92 PCI Faxmodem.
If a "Hardware Installation" warning appears, click
C o n g ra t u l a t i o n s .
cessfully completed the installation procedure. Please register your 56K PCI
Faxmodem at
www.usr.com/productreg/
1 USRobotics has tested this product and verifies it is compatible with Windows XP.
jack.
.
Next
If prompted, reboot your computer.You have suc-
.
port on the modem.
No, not
and click
Continue Anyway
1
.
3
Advertisement
Table of Contents
