Endoscope Functions - Olympus EVIS EXERA II Instructions Manual

Chapter 2 Instrument Nomenclature and Specifications
2.2

Endoscope functions

18
1. Ultrasonic cable connector
Connects the ultrasonic cable of the ultrasound diagnostic equipment to the
endoscope.
2. Suction connector
Connects the endoscope to the suction tube of the suction pump.
3. S-cord connector mount
Connects the endoscope with the Olympus electrosurgical unit via the
S-cord. The S-cord conducts leakage current from the endoscope to the
electrosurgical unit. To connect the S-cord, refer to the instruction manual
for the electrosurgical unit. Connect the fitting part of the chain for
water-resistant cap to this mount, as required (see Section 2.4, "Attaching
the chain for water-resistant cap (MAJ-1739)" on page 25).
4. Endoscope connector
Connects the endoscope to the output socket of the light source and
transmits light from the light source to the endoscope.
5. Water supply connector and air supply connector
Connects the endoscope to the water container via the water container tube
to supply water to the distal end of the endoscope.
6. Videoscope cable connector
Connects the endoscope to the video system center via the videoscope
cable. The endoscope contains a memory chip that stores information about
the endoscope and communicates this information to the video system
center CV-160, CV-180. For more details, refer to the instruction manual for
the CV-160, CV-180.
7. Elevator control lever
When this lever is moved in the "
raised; when the lever is moved in the opposite direction, the forceps
elevator is lowered.
8. UP/DOWN angulation control knob
When this knob is turned in the "
UP; when the knob is turned in the "D
moves DOWN.
9. UP/DOWN angulation lock
Moving this lock in the "F
the opposite direction locks the bending section at any desired position.
ULTRASOUND GASTROVIDEOSCOPE GF-UCT180
U" direction, the forceps elevator is
U" direction, the bending section moves
" direction, the bending section
" direction frees angulation. Moving the lock in