Table of Contents
Advertisement
Method A
Select SPEAKERS A or B
1
Select the function TUNER.
2
Select FM or AM.
Select the desired preset station by the
STATION SCAN + or - button.
• Each time you press STATION SCAN + (or
-), a preset station of next higher (or lower)
channel number is tuned in.
• If you keep pressing + (or -), preset stations
are successively tuned in in the increasing (or
decreasing) order of channel number. Release
the button when the desired station is tuned
in.
• Scanning of the preset stations takes place
cyclically from AM to FM and vice versa.
Method B
1
Select the function TUNER.
2
Select FM or AM.
3
Enter the channel number of the desired
preset station by using numeric buttons.
4
Establish the channel number entry by
pressing the ENTER button.
Notes on Method A
•When the receiver is in the LINK OFF state, all preset stations
can be scanned.
•When the receiver is in the LINK ON state, only those preset
stations which belong to the music index category that is
displayed at present.
• For LINK ON/OFF selection, use the PRESET EQ LINK button,
(For details, see "Using the Graphic Equalizer," page 28.)
Advertisement
Table of Contents
