Table of Contents
Advertisement
Making the commander learn the recording
function
Be sure to press the ◄ or ► button while keeping
the# button pressed. The learning may not be
performed if you press # only.
To activate recording using the learned function,
press ◄ or ► while keeping # pressed.
When the mode selector is set to USER STD
• Pressing a button on which no function has been
learned will always activate the Sony standard
function assigned to that button.
• No function will be activated if the pressed button
haslHarned unrelated signals such as noise from
fluorescent light.
• The TVA/TR buttons control VCR 2 such as Sony 8 mm
VCR.
Avoiding memorization of noise or useless
signals
When using the learning function, be sure to handle
both commanders away from a noise source and
put the commanders themselves close to each
other.
If the READY indicator doesn't light up at step 1 or 4
The learning function will not work well. This may occur
when you handle the commanders close to a noise source
such as a fluorescent light or an equipment emitting
infrared rays.
Remove both commanders away from the noise
source.
If the LEARNED indicator flickers at step 3
The RM-PIOTs memory has been occupied by
noise or useless signals to it's all capacity.
If this situation occurs, you cannot use the learning
function any more before once erasing all contents
of the memory.
Erasing the contents of the memory
1. Set the mode selector to LEARN.
2. While keeping the
of the VCR operation
buttons pressed, press the MUTING button.
21
Advertisement
Table of Contents
