Table of Contents
Advertisement
[T] POWER ON/OFF button
Turns on/off the receiver.
[
2
] POWER ON/OFF buttons
TV: Turns on/off the TV.
VTR: Turns on/off the VCR 1, 2 or 3.
[
3
] TV operation buttons
TV CH: Channel select buttons
TV VOL: Volume control buttons
[5 Spare buttons
^notions of other remote commanders can be learned
on these buttons. (See "Using the Learning Function,"
page 20.)
PHONO buttons
START: Starts record play.
STOP: Stops record play.
[i]TUNER PRESET buttons
+ : Selects a higher preset channel number.
-: Selects a lower preset channel number.
|T]VOLUME control buttons
[U MUTING button
[i]SURROUND ON/OFF button
[
1
^ LEARNED and READY indicators
LEARNED: Lights up when learning of a function of
other commander is complete.
READY: Lights up when the commander is ready to
learn a function of other commander.'
[
11
] Mode selector
LEARN: To perform learning function.
SONY STD.: To operate the commander on Sony
Standard.
USER STD.: To use the learned functions,.
[l^VTR operation buttons
Rewind
► : Play
►►: Fast forward
TV/VTR: Select the output signal from the VCR, either
a TV signal or VCR programs.
VTR CH: VCR channel select buttons
■ : Stop
l|: Pause
• : Recording (While you press •. press ► )
Notice:
If your VCR has a command mode selector and it
is set to VTR 1, these buttons will operate only when the
mode selector of this commander is set to SONY STD. If
the VCR's selector is set to VCR 2. the mode selector
must be set to USER STD.
IiUtaPE deck operation buttons
Reverse fast winding
Reverse play
►: Forward play
Forward fast winding
■ : Stop
II:
Pause
•: Recording (While you press •, press ◄ or ►.)
O: Record muting
Note:
If your tape deck is a double-deck type, refer to Its
instruction manual concerning the deck which can be
controlled with this commander.
0CD player operation buttons
► : Starts play.
■ : Stops play.
I◄◄/►►I: AMS (Automatic Music Sensor)
DISC SELECT: Effective only when the connected CD
player is equipped with a disc changer.
REPEAT: Repeat play
SHUFFLE: Shuffle play
PGM: Program play
[
15
] Function selectors
GRAPHIC EQUALIZER control buttons
FREQ: Frequency select buttons
+: Selects a higher frequency.
-: Selects a lower frequency.
LEVEL: Level select buttons
+: For higher level
-: For lower level
Ii5 Music Index select buttons
+:
Each time you press this button, a different Music
Index is selected in the following order:
C
OPTION 2-*>
OPTION 1-^
ROCK -►JAZZ -►POPS —I
COUNTRY-^-CLASSIC^TALK ^
-: A different Music Index is selected in the order
reverse to
17
Advertisement
Table of Contents
