Inserting Batteries - Pentax MV-1 Manual

Hide thumbs Also See for MV-1:
Table of Contents

Advertisement

INSERTING BATTERIES
Two Alkaline batteries are
packed separately. Be sure to
insert them into the battery
chamber before operating
the camera.
CAUTION
i
The battery is like
a phonograph record. It can be
damaged by skin acids. Handle
by the edges with a dry cloth
before insertion into the camera.
Also be especially sure to wipe
off the batteries with a cloth
when they are salted.
The battery is not rechargeable.
Do not throw a dead battery
into a fire, as it may explode.
Also, keep it beyond the reach
of small children.
Insertion Open the battery
chamber cover with a coin.
Insert the two batteries into the
battery chamber of the camera
as shown above, each with plus
mark (+) facing down. For
replacement, use Eveready S76E
or Mallory MS76H or equivalent.
Check If batteries are active,
one of the LED indicators will
light when you depress the
shutter button partway with
the exposure mode dial set to
AUTO. When batteries are
dead or inserted improperly,
the LEDs will not light.
• 7

Advertisement

Table of Contents
loading

Table of Contents