Inserting Batteries.6~7 - Pentax 645 Operating Manual

BASIC PREPARATION
Use six AA batteries of the types mentioned below
in accordance with the instructions on the battery
case;
• Manganese batteries
• Alkaline batteries
• Ni-Cd rechargeable batteries (a charger needed)
(New batteries are packed at the time of
shipment, but because of inherent self-
discharging, performance gradually
deteriorates as time goes by. In such a
case, replace the packed batteries with
brand-new ones.)
INSERTING BATTERIES (GRIP 645)
1 2
1. Prior to placing of the batteries into the grip
section, turn off the main switch located on the
grip. Then remove the battery holder by pushing
battery holder release button in direction of the
arrow.
2. Install six 1.5V "AA" batteries in accordance
with the diagram located in the battery chamber.
Make sure proper battery polarity (+ and -) is
maintained. Angle the batteries into the holder,
placing the battery onto the spring plate
(contact) first, then push the other end into
position. The batteries are easily removed by
pressing the battery in the oval cutouts on both
sides of the battery holder.
6