Pelonis PSH23FT3DSBC Owner's Manual page 7

OPERATION INSTRUCTIONS
Check Before Turning On The Machine
• Check if the power wire is under good condition.
• The product adopts 120V AC power supply, before use, please confirm if the rated
current of the power socket meets the local requirements with safe grounding device,
otherwise, please replace it with the qualified socket.
Panel Operation & Display
Timer
Temperature
setting
• Plug the unit into a grounded 120V~ outlet, the power light "
ON/OFF
• Press the button "
MODE
• If the machine is set as heater mode "
TEMPERATURE
SETTING
Function description
press the ON/OFF "
the unit. Repeat the"
of Heater high "
temperature value, set the range of 5-35°C. When the room
temperature exceeds the set temperature, the machine stops
working, and stay in the standby state.When the temperature is
lower than the set temperature -2°C, the machine starts to heat up
again.
" to turn on or turn off.
" to set the desired mode(Heater or Fan) of
" button, the unit cycles through the modes
", Heater low "
06
Dispaly area
ON/OFF
Mode
", Fan high "F2", Fan low "F1".
", press " "can set the
" on ,