Table of Contents
Advertisement
System Installation Manual
GFK-2736B
9.3.1
Mounting distances for VersaPoint Modular IO terminals
Mounting distances for terminals in the 24 V DC, 120 V AC,
and 230 V AC areas (excluding terminals with fiber optic
connections)
Figure 40 Mounting distances for terminals in the 24 V DC, 120 V AC, and 230 V AC
areas
Important
If the distances are smaller, the minimum bending radius of the cables, easy handling
during installation, and a clear structure cannot be guaranteed.
Mounting distances for terminals with fiber optic
connections
The bending radius and the space required for mounting terminals with fiber optic
connections depends on the fiber optics used. Furthermore, the connector that is used
affects the mounting distances.
According to the guidelines valid at the time of publication (Revision 01, 06/2012) the
minimum bending radius for individual wires is 30 mm, and the minimum bending radius
Mounting/removing devices
Section 9
Feb 2022
76
Advertisement
Table of Contents
