Advertisement
DUST SEAL LOCATION
Typo
On newer non-waterproof models, the dust seals shown
above are used. Type "A" is a formed metal seal with a bent
tag. After being fitted to the winding stem, the bent tag should
lie flat on the top face of the front frame and the body of the
seal placed between the caseback and bezel. The case should then
be carefully closed.
Type "B" is the same as type "A" except that the bent tag
has been eliminated. It fits exaaly the way type "A" fits except
that the chamfered end should lie toward 12 o'clock.
PLATE III
Advertisement
