Before Starting Measurements - Panasonic EW3152 Operating Instructions Manual

BEFORE STARTING MEASUREMENTS
Open the display
Press the Open button for display
on the front of the main unit.
* The display will only open partially by itself.
Use your hand to open the display fully for
use.
Setting the date and time
* Please be sure to set the date and time before taking the first measurement after
purchasing the blood pressure monitor or after changing the batteries.
e If measurements are taken without setting the date and time, the date and time
will not be stored.
* Please read the "Caution when using only the AC adapter" on p. 10.
Press the set button | 8/ 3 520 Set the hour.
below the display. CD Press the Set button. The
The month value will blink. hour value will blink.
© Press the Adjust button to
set the correct hour.
073 500 Set the minute.
3 (5:00)
[FP EoD Set the month. UNI CD Press the Set button. The
Press the Adjust button minute value will blink.
repeatedly to set the © Press the Adjust button
correct month. repeatedly to set the correct
o minute.
Press the Set button at
B/ 3 538 i i
itm Set the day. 30 the ACON in
@ Press the Set button. The changes 19 ! na ize
day value will blink. e.daterdme:Sening;
(2) Press the Adjust button Press the On/Off Start
Me dene button to switch off
y the power.
When the date or time are blinking, the clock is stopped.
During leap years, 3/1 will be displayed on February 29. For this reason, reset the date to 2/29.
Use the tip of a ballpoint pen or similar object to lightly press the Set and Adjust buttons. If you use
a mechanical pencil, the lead may break, causing a malfunction.
12